Make some cute bath toys out of craft foam with your Cricut knife blade! DIY foam bath letters and faces will create lots of bath time fun for little kids!
Open design in Cricut Design Space select customize, resize and choose colors according to your preferences.
Make the pieces that you want to cut on the same sheet, the same color on the Design Space canvas. When you're ready to start cutting, select 'Make it.'
Design Space will show you how many different mats you need to prepare based on all the different colors you are choosing to cut. You can also re-arrange the shapes on the mats right now to save material.
This is also when you should change your material size if you are planning to use a bigger mat, like a 12x24. Change it on all of the mats before you begin cutting.
Load mat and press 'go.' Select 'more pressure' when the options on the screen ask. The knife blade will do a couple of passes with each shape, then a screen will pop up asking if you want to finish with the cut.
Push the 'go' button again on your machine for the machine to repeat the passes again.
Once the machine has done four passes, the craft foam is ready. It will still be attached a little bit to the sheet, but you should be able to easily pop the shapes out. Take care when you do this not to rip anything.
Optional: trim the edges of the craft foam shapes with scissors for a perfectly clean edge.