Pull up the #1 Pizza Maker design in your Cricut Design Space canvas.
Size design to your liking, (or modify it if you want to) then click 'make it.'
Mirror your design. To do this, toggle the 'mirror' button over so that it is green. Always choose mirror for iron-on designs!
Select the material you are using (Everyday Iron-On or whichever kind of Iron-On you have.)
Click 'continue.'
Put vinyl onto mat, shiny side down.
Load mat into the machine and click 'go!' when the button flashes.
Weed extra iron-on from around the design, carefully remove the middle pieces from letters, etc.
Heat up your iron or Easypress 2. Make sure if you are using an iron that your steam setting is turned off.
Iron design onto t-shirt carefully.
Warm peel - this means you let the design sit on t-shirt after ironing until it is no longer hot, but not totally cool. This usually just takes a minute or two.
From the corner, pull the clear plastic sheet off of the shirt diagonally. Do this carefully. If your design starts to pull up with the plastic, carefully put it back down and iron again.