Pull up the Lucha Libre t-shirt design in your Cricut Design Space canvas.
Size design to your liking, (or modify it if you want to) then click 'make it.'
Mirror your design. To do this, toggle the 'mirror' button over so that it is green. Always choose mirror for iron-on designs!
Select the material you are using (Everyday Iron-On or whichever kind of Iron-On you have.)
Click 'continue.'
Put the iron-on onto a green Cricut mat, shiny side down.
Load mat into the machine and click 'go!' when the button flashes.
Repeat this step until all colors are cut.
Weed extra iron-on from around the designs, carefully remove the middle pieces from letters, etc.
Heat up your iron or Easypress 2. Make sure if you are using an iron that your steam setting is turned off.
Iron the bottom layer of your design onto a t-shirt carefully.
Warm peel - this means you let the design sit on t-shirt after ironing until it is no longer hot, but not totally cool. This usually just takes a minute or two.
To layer the next parts of the design on top of that, use an iron-on protective sheet. Carefully add the next layer, then the next until you have ironed it all on.
From the corner, pull the clear plastic sheet off of the shirt diagonally. Do this carefully. If your design starts to pull up with the plastic, carefully put it back down and iron again.